Development Tools

	Product	Description	Price	Add to Cart
	Eleven (100% Arduino Uno Compatible)	The "Eleven" is just like an Arduino Uno – but better! It is based on the existing Arduino Uno but with improvements and updates for ease of use, cost and getting started. It's 100% Arduino compatible. Also included in the package are a USB cable, and our Getting Started guide sheet. As well as the standard Arduino Uno features found h...	$38.95	Ships in 7 Days
	Arduino Prototyping Shield	The DFRobot Arduino Prototyping Shield allows you to create a small prototyping board to connect to Arduino USB board and gives the user a small soldering area, two surface mount LEDs & a reset switch.  The board comes fully assembled and includes the Mini Breadboard.  PCB used for Arduino PrototypingMultilayer PCB desig...	$12.95	Ships in 24 hours
	EtherTen	EtherTen (100% Arduino compatible with onboard Ethernet) AU$69.95 inc GST Two tastes that taste great together: Arduino and Ethernet. But until now the only way to connect an Arduino to the Internet via a LAN was to add an Ethernet Shield. Wouldn't it be great if there was an Arduino-compatible board with on-board Ether...	$69.95	Ships in 7 Days
	Arduino Power Supply	9VDC 500mA Ultra-slim Switchmode Power Adaptors MP3146 Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a high efficiency circuitry, built in EMI filter, short circuit protection, ov...	$19.80	Ships in 24 hours
	LCD Keypad Shield	Introduction This is a very popular LCD Keypad shield for Arduino or Freeduino board. It can be directly plug onto the Arudino board, no soldering or fly-wiring needed. A 16x2 HD44780 compatible LCD, White character & Blue backlight. This Shield uses Arudino LCD4Bit library. Specification Documents Manual LCD4Bit ...	$27.00	Ships in 24 hours
	microSD Shield	Update: After taking a figurative lashing from the comments section we're begging for mercy by updating the microSD Shield board. All new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. No more 'blown up' SD cards! Running out of mem...	$15.15	Ships in 7 Days
	FTDI Cable 5V	The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1&qu...	$17.99	Ships in 7 Days
	Cellular Shield with SM5100B	The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) an...	$100.00	Ships in 7 Days
	Relay Module (Arduino-compatible)	Introduction The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects.  It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be...	$13.50	Ships in 24 hours
	FTDI Basic Breakout - 3.3V	This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boar...	$17.19	Notify when back in stock.
	Screw Shield terminal expansion board	The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. Both sides of the shield are broken out to the side of the Arduino, to allow access to everything on the main Arduino board. Stacking headers are also attached so you can pile more shields on top. This product includes all the parts shown and comes pre soldered.	$11.88	Notify when back in stock.
	LCD & Keypad Shield	Like to interface with your project? This LCD and Keypad Shield gives you a handy 16-character by 2-line display, 5 buttons and a controllable backlight, plug it straight in on top of your Arduino board or other project shields. The display is set behind the shield for a low profile fitment and nice look and we've included panel mounting scr...	$29.95	Notify when back in stock.
	MIC sound sensors (Arduino-compatible)	Introduction This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontrollers Analog to Digital converter. Unit comes fully assembled as shown.  Specification Interface Type: Analog  Detects the sound ...	$13.50	Notify when back in stock.
	FTDI Cable 5V VCC-3.3V I/O	The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated...	$17.99	Ships in 24 hours
	Electronic brick - Starter kit	The perfect add on to your Arduino!Check out this brilliant tutorial by John at tronixstuff!!This shield connects directly to your Arduino creating a platform on which you can get sensors, buttons and buzzers working. The brick system is robust and well-designed.This is a great kit for beginners and you can learn through doing.This is a Starter ...	$65.00	Notify when back in stock.
	XBee Shield	This new revision fixes some minor spacing and labeling issues, but functionality remains the same.The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module. This unit works with al...	$26.00	Ships in 7 Days

1 2 3 … 22 Next »