New Products

	Product	Description	Price	Add to Cart
	LilyPad LiPower	LilyPad LiPower DEV-11260    A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single ...	$17.00	Ships in 24 hours
	LilyPad Power Supply	LilyPad Power Supply DEV-11259    A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit. Good up to 200mA. Short circuit protected. This board has AAA battery cl...	$17.00	Ships in 24 hours
	LilyPad Vibe Board	LilyPad Vibe Board DEV-11008   Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use. LilyPad is a wearable technology developed by Leah Buechl...	$11.00	Ships in 24 hours
	Xilinx FPGA Parallel Programmer	Xilinx FPGA Parallel Programmer DEV-09846   This is the SparkFun version of the Xilinx Parallel cable III, also known as the DLC5, with a pinout designed to work with SparkFun FPGA boards. This unit does not ship with a 10-pin IDC cable. We are still waiting for them from our supplier. Please note: This prog...	$12.00	Notify when back in stock.
	LilyTwinkle	LilyTwinkle DEV-11364    The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it's as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it's actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will...	$7.70	Ships in 7 Days
	ProtoShield Mega	A super-size prototyping shield to fit the EtherMega and Arduino compatible "Mega" size boards so you can fit your own parts for projects. Fits on the top of the EtherMega and provides a large matrix of plated-through holes for your own use. One of the features that makes it special is that it's designed to be deliberately shorter on...	$17.00	Ships in 24 hours
	LeoStick (Arduino Compatible)	The LeoStick is designed to be functionally similar to the upcoming Arduino Leonardo, but given the "honey, I shrunk the kids" treatment! Just pop it into your USB port (no cable required!) and upload straight from the Arduino IDE. We've even included on-board RGB LED lights and a speaker in this handy sized board. All the usual Arduino pi...	$29.00	Ships in 24 hours
	FEZ Hydra Basic Kit	FEZ Hydra Basic Kit sku: DEV-11306   FEZ Hydra is a 100% open-source (hardware and software) .NET Gadgeteer compatible mainboard running .NET Micro Framework. It incorporates a 240Mhz AT91SAMRL ARM9 processor. With 16MB of SDRAM an 4MB of FLASH, FEZ Hydra is capable or running the most comple...	$149.00	Ships in 24 hours
	ATMEGA32U4 Breakout	ATMEGA32U4 Breakout sku: DEV-11117   The ATMega 32U4 is an 8-bit AVR microcontroller featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM and a 12-channel 10-bit A/D-converter. It even has on-chip USB 2.0. You might recognize it from our Pro Micro development boards as well as the Arduino Leonardo. Th...	$24.00	Ships in 7 Days
	Papilio One - 500K	Papilio One - 500K sku: DEV-11158   Are you interested in FPGA development but don't know where to start? Why not give Papilio a try? The Papilio One is an open-source development platform based on the capable Xilinx Spartan 3E FPGA. While FPGA devices are massively powerful and configurable, they haven't always been the easie...	$97.33	Ships in 7 Days
	RooTooth - Bluetooth Wireless Roomba Connection	RooTooth - Bluetooth Wireless Roomba Connection sku: DEV-10980    A cable-less solution developed for controlling your Roomba. The RooTooth v2 communicates with any Bluetooth®enabled device using the Serial Port Profile (SPP). You can now tell the Roomba when to wake up, when to clean, and when to shut off. You can even r...	$110.00	Ships in 24 hours
	Copernicus II DIP Module	Copernicus II DIP Module sku: GPS-11067   The Copernicus II is a great new GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. The Copernicus II DIP breakout has an impedance-matched, end-launch, standard SMA ...	$79.00	Ships in 7 Days
	PIC 44 Pin - PIC16F777 (SMD)	PIC 44 Pin - PIC16F777 (SMD) sku: COM-11108   This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into 40- or 44- pin packages and is up compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devic...	$4.80	Ships in 7 Days
	mbed - LPC11U24 (Cortex-M0)	mbed - LPC11U24 (Cortex-M0) sku: DEV-11045   The mbed microcontrollers are a series of ARM microcontroller development boards designed for rapid prototyping and this is the latest in a line of big things in small packages. Specifically designed for prototyping low cost USB devices and battery powered applications, the mbed NXP...	$55.00	Ships in 7 Days
	GP-2106 Breakout Board	GP-2106 Breakout Board sku: GPS-10971    This breakout board gives you access to the little tiny pins on the ribbon connector for the, also tiny, GP-2106 GPS module. All six pins are broken out to standard 0.1" headers. Keep in mind the GP-2106 runs on 1.8V and uses 1.8V logic levels. Note: This board breaks out t...	$5.50	Notify when back in stock.
	Copernicus II DIP Module	Copernicus II DIP Module sku: GPS-10923    The Copernicus II is a great new GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. The Copernicus II DIP breakout has an impedance-matched, end-launch, standar...	$76.00	Notify when back in stock.

« Previous 1 2 3 4 5 6 Next »