New Products

	Product	Description	Price	Add to Cart
	Makeblock Configurable 2WD Robot Kit – Blue	Introduction Makeblock is the next generation of construction and prototyping platform. Help to turn your ideas into success. You can use this platform to build something big, strong and professional.   Most are aluminum extrusion strong parts, smart designed threaded slot allow you to joint screws in any position along the slot withou...	$78.30	Notify when back in stock.
	Rover 5 Robot Platform	Rover 5 Robot Platform ROB-10336  If you're looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even re...	$99.00	Ships in 7 Days
	EasyVR Shield - Voice Recognition Shield	Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC. EasyVR is a multi-purpose speech recogniti...	$60.00	Ships in 7 Days
	L6470 Stepper Driver Breakout	L6470 Stepper Driver Breakout sku: BOB-10859    STMicro's L6470 (a.k.a "dSPIN") is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent detection, undervoltage detection, overtemperature detection, stall detection, a 5-bit ADC, and a switch input that can be used for either user jog control or as a hard ...	$37.00	Ships in 7 Days
	LG-NS robot gripper	Introduction How can your robot rule the world with an iron fist if it doesn't have any hands? The Little Grip Kit makes a great addition to a small arm or mobile base. The gripper features injection molded components and can use two standard hobby servos (not included) for open and close and wrist rotate. The clamp open to 1.3" and...	$25.00	Notify when back in stock.
	Motor Driver 2.5A MC33926	Motor Driver 2.5A MC33926 sku: ROB-11080  These compact motor drivers based on the Freescale Semiconductor MC33926 motor driver integrated circuit from Pololu are an easy way to connect a motor running from 5 to 28 V and drawing up to 5 A (peak) to your project. The board incorporates all of the components of the typical a...	$27.00	Ships in 7 Days
	Solenoid - 5v (small)	Solenoid - 5v (small) sku: ROB-11015  Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 6mm and 2 M2 mounting holes on the body. ...	$6.00	Ships in 7 Days
	Pololu Dual VNH5019 Motor Driver Shield for Arduino	Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both...	$66.00	Ships in 7 Days
	VNH5019 Motor Driver Carrier	This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protect...	$39.00	Ships in 24 hours
	Pololu m3pi Robot with mbed Socket	The Pololu m3pi robot consists of a 3pi robot base with a fully assembled m3pi expansion board as its second level. This expansion board enables the use of ARM’s powerful 32-bit mbed development board as the robot’s high-level controller, which offers significantly more processing power and free I/O lines than the 3pi’s built...	$165.00	Ships in 7 Days
	Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)	Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft) sku: ROB-10848   These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repea...	$35.00	Ships in 7 Days
	Stepper Motor - 125 oz.in (200 steps/rev)	Stepper Motor - 125 oz.in (200 steps/rev) sku: ROB-10847   These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Note: This is a uni-polar stepper, meaning that if you are going to drive it with a bipolar stepper driver, you can ignore the yellow and white ...	$55.00	Ships in 7 Days
	Stepper Motor - 58 oz.in (400 steps/rev)	Stepper Motor - 58 oz.in (400 steps/rev) sku: ROB-10846   These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (degrees) : 0.9 2-Phase Rated Voltage: 3V Rated Current: 1.7A/Phase 5mm Diameter Drive Shaft Hold...	$26.00	Ships in 7 Days
	Gripper	• Comes pre-assembled • Made from 3mm thick aluminium • Contains2 servos • Opens in excess of 50mm The Dagu Aluminum Gripper (with Servos) is made from 3mm thick aluminium and com...	$75.00	Ships in 24 hours
	LCD Clock Training Kit	• AVR/Arduino compatible Atmega8A MCU pre-programmed with Arduino bootloader • 16MHz crystal for accurate time measurements • 28mm speaker for sound and melody generation • USB serial interface This is the Dagu LCD Clock Training Kit. LCD displays are widely used these days in everything from mobile phones to robots. Th...	$75.00	Ships in 24 hours
	Adventure Robot Kit	• Based on Atmega168 • Designed to wander around looking for moving objects • Ideal for the beginner or student • Requires no soldering or wiring • Sample code available ...	$69.95	Notify when back in stock.

« Previous 1 2 3 Next »