Power Supplies

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or ...

This is a high-quality 5V USB wall adapter that is ideal for supplying power to your LattePanda, Raspberry Pi, Arduino and other 5V devices that r...

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting any development board, microcontroller, mobile pho...

Stop noodling around with an LM317 and wall wart - you can wield all the power with the DP832 Triple Output 195 Watt Power Supply!If you're doing a...

NOTE this is US power supply with US plug and not suitable for use in Australia. This is a FCC/CE certified and UL listed power supply. Need a l...

When you need to amplify, filter, add, or otherwise manipulate analog signals you'll certainly want an operational amplifier at your side. This is ...

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batter...

This is a red insulated binding post. These binding posts do accept banana plugs, and are a great way to connect single-wire leads. The colored ...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have matin...

A smaller-sized rechargeable battery pack for your Raspberry Pi or Raspberry Pi B+ (or Arduino, or Propeller, or anything else that works with 5...

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionali...

Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designe...

This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an...

4mm Panel Mount Sockets to suit Banana plugs. Specifications Plug or Socket Type ...

THIS IS A US ADAPTER AND IS NOT CERTIFIED FOR USE IN AUSTRALIA. ONLY PURCHASE IT IF YOU'RE USING IT OUTSIDE AUSTRALIA.This is a really nice power s...

Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designe...

This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1...

This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on ATX motherboards. Two rows of twelve pi...

What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This stackable shield...

This is a 24-pin Molex Mini-Fit Jr.? connector, commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken...

Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V s...

This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pu...

This is an interesting kind of battery holder, usually you'll see ones that are designed for holding like AAA's or something. This battery holder i...

This is a high quality AC to DC ‘wall wart’ which produces a regulated output of 12VDC at up to 600mA. These are switch mode power supplies which m...