Prototyping Hardware
Filter by:
| Product | Description | Price | Add to Cart | |
|---|---|---|---|---|
 |
4mm Steel Hex Nuts - Pk.25 | 4mm Steel Hex Nuts - Pk.25 HP0462 Hex Nuts - Pack of 25 | $3.50 | |
 |
5-10mm DIA IP68 Waterproof Cable Glands - Pk.2 | 5-10mm DIA IP68 Waterproof Cable Glands - Pk.2 HP0727 These unique cable clamps incorporate a unique sealing mechanism which works on the camera shutter principle. Simply mount the clamp, insert the cable through and tighten up. There is no need to disassemble the clamp prior to installation. These c... | $5.95 | |
 |
5mm Cable Clamps - Pk.6 | 5mm Cable Clamps - Pk.6 HP0752 Size Pktfor 5mm cable 6 | $1.95 | |
 |
5mm LED Clips Black - Pack of 20 | 5mm LED Clips Black - Pack of 20 HP1102 Black, requires a 6.35mm panel hole.- Pack of 20 | $2.95 | |
 |
6mm x 3mm Steel Screws - Pk.25 | 6mm x 3mm Steel Screws - Pk.25 HP0400 Length Pack6mm 25 | $2.50 | |
 |
8mm Nylon PCB Standoff - Pk.8 | 8mm Nylon PCB Standoff - Pk.8 HP0770 Saves using nuts, bolts and spacers.Size 8mm. Requires 3mm hole each end. | $2.50 | |
 |
9mm x 3mm Tapped Nylon Spacers - Pk.25 | 9mm x 3mm Tapped Nylon Spacers - Pk.25 HP0922 These spacers are tapped all the way through for a 3mm screw.OD 6mm.Length Pack9mm 25 | $9.45 | |
 |
Alligator Clips With Screw - Pk.2 | Alligator Clips With Screw - Pk.2 HM3025 No soldering required. Large alligator clips with plastic finger grips and a screw for connection. Length 65mm.- Max jaw opening 12mm.- Sold as a pair or singularly.- 1 Red & 1 Black | $2.45 | |
 |
Angle Bracket - 4-40 | These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such. Sold as single units. Documents: ... | $0.58 | |
 |
Black Test Clip - EZ Hook - 40mm | Black Test Clip - EZ Hook - 40mm HM3037 Suitable for ICs, transistors, PC pins, etc.Push syringe action. Hirshmann style. - BLACK | $1.75 | |
 |
Blue Push On Style Knob | Blue Push On Style Knob HK7709 These knobs just push on to a standard 0.25" (1/4") shaft.- No more messy screws.- Complete with coloured cap.- 18mm diameter- 20mm high.- Blue | $0.85 | |
 |
Breadboard - 830 tie points | Breadboard - 830 tie points PB8814 - 840 tie points - 200 distribution holes - 640 terminal holes (Simply a combination of 2 x Distribution strip + 1 Terminal strip)- Size 65(W) x 175(L) | $19.95 | |
 |
Concrete Cable Tie Mounts - Pack 20 | Concrete Cable Tie Mounts - Pack 20 HP0795 These handy cable tie mounts make it possible to use cable ties in runs along walls and ceilings make of brick or concrete.- UL 94V-2 approved Nylon- Pack 20 | $5.50 | |
 |
Contact Connectors - Wire Joiners - Pk.4 | Contact Connectors - Wire Joiners - Pk.4 HP1206 Simply wrap around the existing wire and new wire and squeeze. Connector cuts through insulationand makes contact without damaging the conductor.- Fully insulated once on.- PKT 4 | $2.95 | |
 |
Crimp Wire Connectors - 2 & 3 wire - Pk.8 | Crimp Wire Connectors - 2 & 3 wire - Pk.8 HP1214 The easy way to connect 2 or 3 wires together. Simply insert into the connector, & squeeze with apair of pliers. They are filled with sealant to provide moisture resistance. Accepts cable up to 1.08mm OD.- Pack of 8. (6 x 2 wire) and (2 x 3 wire) c... | $4.95 | |
 |
Crimp Wire Connectors - 2 Wire - Pk.50 | Crimp Wire Connectors - 2 Wire - Pk.50 HP1270 The easy way to connect 2 or 3 wires together. Simply insert into the connector, & squeeze with apair of pliers. They are filled with sealant to provide moisture resistance. Accepts cable up to 1.08mm OD.- Pack of 50 - 2 wire connectors ... | $10.95 |
