Sparkfun

	Product	Description	Price	Add to Cart
	Pocket AVR Programmer	This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Steefland's USBtiny and Limor Fried's USBtinyISP. We've gotten a big response (see comments and forum posts below) from Mac and Linux users hav...	$17.00	Ships in 7 Days
	AVR Programming Cable	This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long.	$2.49	Ships in 7 Days
	AVR - ICSP Adapter	This is an adapter assembly that converts 2x5 pin connector to 2x3 pin mini-ICSP. Comes with a mini-ICSP cable terminated female at both ends. The adapter board comes terminated as male 2x3 pin to female 2x5 pin. Cable is about 7.3" long.	$6.84	Ships in 24 hours
	STK500 Compatible USB Programmer	AVR-ISP500 is a fast and reliable USB AVR programmer, and works directly with AVR Studio. It is recognized as a STK500 programmer and programs all AVRs. It emulates USB CDC so no drivers are required and works under Windows, Linux and MacOS. If you do not want to use AVRStudio you can use AVR-ISP500 with AVRdude. Features: &#...	$55.14	Ships in 7 Days
	AVR Stick	The AVR Stick is a simple data logging device that instantiates itself as an HID keyboard and reports the voltages, along with a 'timestamp,' from two pins on an ATtiny85.  The device uses open source firmware availabe from Objective Development (http://www.obdev.at/vusb/) called V-USB to implement the USB 1.1 standard.  The code...	$9.95	Ships in 7 Days
	XMega100 Breakout	This is a breakout board for the 100-pin TQFP package of Atmel's ATxmega128A1. The ATxmega128A1 is a low power, high performance and peripheral rich CMOS 8/16-bit microcontroller based on the AVR enhanced RISC architecture.Among the chip's many features are 128kB of flash memory, 8 kB SRAM, 78 I/O pins, eight 16-bit timers, sixteen 12-bit ADCs, ...	$24.95	Ships in 7 Days
	ATMEGA8U2 Breakout	ATMEGA8U2 Breakout sku: DEV-10277  The board comes pre-loaded with the SparkFun USB to Serial COM Port firmware. When the board plugs into a USB port, Windows will ask for a driver, point to the driver .inf file found here. The board should now enumerate as a 'SparkFun COM Port' and act the same as the SparkFun FTDI Basic. In o...	$24.00	Notify when back in stock.
	AVR STK Serial Port Dongle Programmer	AVR-PG1B is programmer based on serial port PonyProg design. It takes the power supply from the target board. The connector is 2x5 pin with 0.1" step and Atmel STKxxx compatible layout. Dimensions: 45x30 mm (1.7x1.2") + 20 cm (8") cable Documents: avr-pg1b.pdf, AVR-PG1B schematic, AVR ICSP connector ...	$14.89	Ships in 7 Days
	ATMEGA32U4 Breakout	ATMEGA32U4 Breakout sku: DEV-11117   The ATMega 32U4 is an 8-bit AVR microcontroller featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM and a 12-channel 10-bit A/D-converter. It even has on-chip USB 2.0. You might recognize it from our Pro Micro development boards as well as the Arduino Leonardo. Th...	$24.00	Ships in 7 Days
	28 Pin AVR Development Board	Prototype board for 28 pin AVR microcontrollers with with power supply circuit, crystal oscillator circuit, RS232 port, reset IC, status LED, and 10 pin STK ICSP port. Freatures: STK200 compatible ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2 RS232 Tx, Rx interface with MAX...	$23.65	Ships in 7 Days
	40 Pin AVR Development Board	Prototype board for 40 pin Atmel ATMega microcontrollers with power supply circuit, 8MHz crystal oscillator circuit, RS232 port, reset IC, status LED, and 10 pin STK ICSP port. FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print Four mounting holes 3.3 mm (0.13") ICS...	$23.65	Ships in 7 Days
	ATmega128RFA1 Development Board	This is a breakout board for the ATmega128RFA1. It includes an onboard 3.3V regulator, chip antenna, and DC input jack. The board can be powered with either a 5V or a 9V wall wart. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontroller and best-in-class 2.4GHz RF transceiver p...	$63.19	Ships in 24 hours
	AVR In Circuit Emulator with USB Interface	AVR-USB-JTAG has all the power of the original AVR-JTAG plus the flexibility of a USB interface. This is a low-priced equivalent of the much more expensive JTAGICE, with a handy and safe optically isolated USB interface. Use it to debug and emulate many of the Atmel processors! This unit has a female USB 'B' connector on it which means you...	$65.49	Ships in 7 Days
	8 Pin AVR Development Board	An excellent entry level prototype board for 8 pin AVR microcontrollers with power supply circuit, crystal oscillator circuit, RS232 port, and STK 10 pin ICSP port. FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print ICSP 5x2 pin connector for in-circuit programming with AVR Programmers ...	$16.90	Notify when back in stock.
	Development Board for AT90USB162	AT90USB162 is the easiest way to add USB functionality to your next device. Atmel provide free open source HID (mouse, keyboard) and CDC (USB-to-RS232) code and on top of this the AT90USB162 with the same cost as the ATMega16. Includes USB connector and circuit, external power supply if your circuit require more power than 100mA, button, s...	$29.84	Ships in 7 Days
	ATMega128/103 Bare PCB	A breakout board for the popular ATMega128 micro controllers. These are very nice PCBs with the AVR STK programming port, JTAG Debugging Port, and lines for power regulation. Please see schematic for specifics. FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print Extension pin headers...	$4.54	Ships in 7 Days

1 2 3 Next »