Sparkfun

	Product	Description	Price	Add to Cart
	Screw - Phillips Head (1/4", 4-40, 10 pack)	Screw - Phillips Head (1/4", 4-40, 10 pack) sku: PRT-10453  There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.	$1.50	Ships in 24 hours
	Standoff - Nylon (3/8", 4-40, 10 packs)	Standoff - Nylon (3/8", 4-40, 10 packs) sku: PRT-10927   These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screw...	$3.30	Ships in 24 hours
	Silicone Bumpers (set of 4)	Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. These are self-adhesive and 8mm in diameter and about 2mm tall. They come in a set of 4.	$0.58	Ships in 24 hours
	MakerBeam	MakerBeam sku: PRT-10540  MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to build real ma...	$150.00	Ships in 7 Days
	Standoff - Metal (3/8", 4-40, 10 pack)	Standoff - Metal (3/8", 4-40, 10 pack) sku: PRT-10739  Metal short standoffs: 3/8" long x 1/4"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don't forget the screws! Related below. Set of ten	$2.95	Ships in 7 Days
	Standoffs Plastic - 3/4" (10 pack)	Standoffs Plastic - 3/4" (10 pack) sku: PRT-10462   These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Sold in packs of 10. Check below for matching screws.	$4.40	Ships in 24 hours
	Standoff - Metal (1", 4-40, 10 pack)	Standoff - Metal (1", 4-40, 10 pack) sku: PRT-10738   Metal long standoffs: 1" long x 1/4" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available holes. Don't forget the screws, found below. Note: We are now selling these in packs of ten. The image shows four stando...	$4.50	Ships in 7 Days
	Angle Bracket - 4-40	These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such. Sold as single units. Documents: ...	$0.58	Ships in 7 Days
	Machine Screw Nut 2-56	These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units.	$0.17	Ships in 7 Days
	Standoffs Plastic Short	Plastic short standoffs: 3/8" long x 1/4"OD Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don't forget the screws! Related below. Set of four	$1.95	Notify when back in stock.
	Machine Screw Nut - 4-40	We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And ...	$0.17	Ships in 7 Days
	Screws 4-40 Thread Black	Black steel Phillips head screws. 1/2" long with 4-40 thread. Fits all stand-offs and development boards with available holes. Recommended for assembling bezels with the Simon (4 screws) and 4x4 Button Pad boards (ten screws). Sold in single units.	$0.34	Ships in 24 hours
	MicroRax - Medium Kit	MicroRax - Medium Kit sku: PRT-10810  If you're in the market for a rigid prototyping system, MicroRAX may be just what you're looking for! MicroRAX is a miniature light-weight T-Slot style building system. Suitable for use on your desktop or bench top to build science, engineering, or advanced hobby and DIY projects. Micro...	$275.00	Ships in 7 Days
	Silicone Bumpers - Large (10x16.5mm, 4 pack)	Silicone Bumpers - Large (10x16.5mm, 4 pack) sku: COM-10594  Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. These are self-adhesive and...	$1.45	Ships in 7 Days
	MicroRax - Small Kit	MicroRax - Small Kit sku: PRT-10809  If you're in the market for a rigid prototyping system, MicroRAX may be just what you're looking for! MicroRAX is a miniature light-weight T-Slot style building system. Suitable for use on your desktop or bench top to build science, engineering, or advanced hobby and DIY projects. MicroRAX...	$135.00	Ships in 7 Days
	Standoffs Plastic 3/8" (10 pack)	Standoffs Plastic 3/8" (10 pack) sku: PRT-10461   These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Sold in packs of 10. Check below for matching screws.	$3.30	Ships in 7 Days

1 2 3 Next »