Sparkfun

	Product	Description	Price	Add to Cart
	9V to Barrel Jack Adapter	This simple cable has so many uses! Plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack. Use this cable to battery-power any device that needs 9V and has an on-board barrel jack - it works great for Arduinos, development boards, evaluation boards, and more!	$3.11	Ships in 7 Days
	DC Barrel Jack Adapter - Breadboard Compatible	DC Barrel Jack Adapter - Breadboard Compatible sku: PRT-10811  This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter. ...	$1.50	Ships in 7 Days
	DC Barrel Jack Adapter - Male	This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.	$2.95	Ships in 7 Days
	DC Barrel Jack - Panel Mount	DC Barrel Jack - Panel Mount sku: PRT-10785  This is a great DC power jack/connector for projects in an enclosure. This is a common barrel-type power jack for DC wall supplies, in a panel-mount form factor. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter. Simply drill the proper...	$3.55	Ships in 24 hours
	Barrel Jack Adapter - USB to 5.5mm	This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V. The USB specification limits current consumption to a max of 500mA from a USB port bu...	$3.77	Ships in 7 Days
	DC Barrel Jack Adapter - Female	DC Barrel Jack Adapter - Femalesku: PRT-10288  This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.	$2.95	Ships in 24 hours
	Barrel Jack to 2-pin JST	Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. Thi...	$3.77	Ships in 24 hours
	ATX Connector Breakout Board	This is a breakout board for our right-angle, 24-pin ATX connector. Pair this board with the ATX connector and a standard PC power supply and you'll have 3.3V, 5V, and ±12VDC to supply to your project. Make sure you ground the PS_ON pin to enable all of the outputs. All outputs of the power supply are broken out to an 8-p...	$5.35	Ships in 24 hours
	DC/DC Converter Breakout	DC/DC Converter Breakoutsku: BOB-09370This is a breakout board for our non-isolated, 6A DC-to-DC Converter Module. The module can convert any DC voltage between 4.5-14VDC to a selectable voltage between 0.59 and 5.5VDC.To set the output voltage to the desired level, a resistor must be added between the Trim and GND pins. For example, to set the ...	$29.95	Ships in 7 Days
	Car Adapter USB Power Supply - 5VDC 650mA	This is device that plugs into the 12-24V outlet in cars. It has a USB type A connector and can source 5V up to 650mA. This allows the user to charge or run a USB device in a car! We know - it's nothing too novel, but extremely handy if you've got a device that can charge over USB. The car adapter also works as a great 5V source to run man...	$5.69	Ships in 7 Days
	Car Adapter Power Supply--7.5VDC 3A	This adapter plugs into the 12-24V outlet in cars. It has a barrel plug connector that measures 5.5mm x 2.1mm, center positive. The output power is regulated and rated to 7.5VDVC and up to 3A. Cable length is 1m.Check out our Unregulated Power Supply Tutorial!Features: Works in cars or trucks with 12V to 24V input &#...	$9.95	Ships in 7 Days
	Switching Power Supply - 24V 500mA	This is a nicely enclosed unit that takes an AC supply between 85V and 265V and steps it down to 24VDC at 500mA. Contains 5 screw terminal, two for AC input, two for DC output and one for a common ground.	$12.59	Notify when back in stock.
	Wall Adapter - 5V USB	This is device that plugs into any North American, type A, 110-240V wall plugs. It has a USB type A connector and can source 5V up to 500mA. This allows the user to charge or run a USB device without the need for any computer USB ports! We know - it's nothing too novel, but extremely handy if you've got a device that can charge over USB.&#...	$4.95	Notify when back in stock.
	Barrel Jack Power Switch - M-F (3")	Barrel Jack Power Switch - M-F (3")COM-11705  We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable, but the whole point of using the barrel jacks was so that we wouldn't have to hack things apart... Well, we found a solution: Th...	$3.30	Ships in 7 Days