Sparkfun

	Product	Description	Price	Add to Cart
	Pocket AVR Programmer	This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Steefland's USBtiny and Limor Fried's USBtinyISP. We've gotten a big response (see comments and forum posts below) from Mac and Linux users hav...	$17.00	Ships in 7 Days
	AVR Programming Cable	This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long.	$2.49	Ships in 7 Days
	MPLAB PICkit 3	This is the new PICkit 3 from Microchip. If you want an official programmer from Microchip, this is it! The PICkit 3 allows debugging and programming of PIC and dsPIC microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to a PC using a full speed...	$73.00	Ships in 24 hours
	PICAXE USB Programming Cable	If you're looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programming cable allows PICAXE micros to be programmed from any platform (Windows and Linux). The cable has the FT232R embedded into the USB connector and will show up on your computer as a new COM port. Under windows - you'...	$29.84	Ships in 24 hours
	AVR - ICSP Adapter	This is an adapter assembly that converts 2x5 pin connector to 2x3 pin mini-ICSP. Comes with a mini-ICSP cable terminated female at both ends. The adapter board comes terminated as male 2x3 pin to female 2x5 pin. Cable is about 7.3" long.	$6.84	Ships in 24 hours
	STK500 Compatible USB Programmer	AVR-ISP500 is a fast and reliable USB AVR programmer, and works directly with AVR Studio. It is recognized as a STK500 programmer and programs all AVRs. It emulates USB CDC so no drivers are required and works under Windows, Linux and MacOS. If you do not want to use AVRStudio you can use AVR-ISP500 with AVRdude. Features: &#...	$55.14	Ships in 7 Days
	MPLAB Compatible USB PIC Programmer	This PIC programmer, from Cana Kit, is a professional USB PIC Programmer offering ZIF (Zero Insertion Force) sockets, an ICSP header, and an ICD2 port for easy PIC programming. The programmer is 100% compatible with MPLAB (PICkit 2 interface), and therefore can program practically any PIC microcontroller including the PIC16F84, PIC16F628, ...	$69.95	Ships in 7 Days
	MPLAB Compatible Mini USB PIC Programmer	This PIC programmer, from Cana Kit, is a professional, compact USB PIC Programmer offering a 20-pin ZIF (Zero Insertion Force) socket for easy PIC programming. The PIC Programmer is 100% compatible with Microchip's MPLAB IDE, and the PICkit 2 interface, and can program all popular PIC 5V microcontrollers including the PIC16F84, PIC16F628, ...	$49.95	Ships in 7 Days
	PICAXE Serial Programming Cable	Used for programming, this cable allows the PICAXE to be connected to any computer with a serial port. The folks at PICAXE have developed a very convenient way to develop with PIC microcontrollers! By placing a small bootloader onto the IC, the user can download new PICAXE code onto the IC over a serial connection. This cable has a standar...	$6.84	Ships in 7 Days
	SparkFun USB Programmer for PICAXE	The PICAXE USB programmer allows PICAXE micros to be programmed from any platform (Windows and Linux). The programmer uses the FT232R and will show up on your computer as a new COM port. Under windows - you'll need to install FTDI drivers but it's really easy! This board is effectively the same thing (once you add the miniUSB ca...	$17.19	Ships in 7 Days
	JTAG USB OCD Programmer/Debugger for ARM processors	This is the mother of all JTAG Programmers for ARMs - and it's about 1/10th the price of other programmer/debuggers with the same functionality! Features: First on market three-in-one USB JTAG debugger - offers JTAG + RS232 (full modem signals supported) port + power supply all in one compact device F...	$55.00	Ships in 24 hours
	JTAG USB OCD Tiny - Programmer/Debugger for ARM processors	This is a low cost USB-based JTAG programmer for ARM processors based on the OpenOCD platform. Features: Debug all ARM microcontrollers supported by OpenOCD Fast speed USB 2.0 JTAG dongle interface. Can be used with all ARM devices for programming and debugging. Uses ARM's stand...	$59.74	Ships in 7 Days
	AVR STK Serial Port Dongle Programmer	AVR-PG1B is programmer based on serial port PonyProg design. It takes the power supply from the target board. The connector is 2x5 pin with 0.1" step and Atmel STKxxx compatible layout. Dimensions: 45x30 mm (1.7x1.2") + 20 cm (8") cable Documents: avr-pg1b.pdf, AVR-PG1B schematic, AVR ICSP connector ...	$14.89	Ships in 7 Days
	AVR In Circuit Emulator with USB Interface	AVR-USB-JTAG has all the power of the original AVR-JTAG plus the flexibility of a USB interface. This is a low-priced equivalent of the much more expensive JTAGICE, with a handy and safe optically isolated USB interface. Use it to debug and emulate many of the Atmel processors! This unit has a female USB 'B' connector on it which means you...	$65.49	Ships in 7 Days
	Serial Port Programmer - Socketed	PIC-PG2C is the newest revision of our very popular, simple to use programmer! Based on the JDM design which takes all necessary signals and power supply from RS232 serial port. It supports 8, 18, 28 and 40 pin PIC microcontrollers which allow serial programming and I2C EEPROM memories. Now with an ICSP header! Comes with ICSP cable. The P...	$16.04	Notify when back in stock.
	MPLAB Compatible ZIF Programmer - USB Powered	The latest and greatest from Olimex! It's got all the power of the original MCP with one less wire and a lot less weight. Now there is no need to worry about carrying around an extra power supply - all programming power is generated from the USB port! Tablet PC users unite! A low cost alternative to PicStart+. The MCP-USB is MPLA...	$105.74	Ships in 7 Days

1 2 Next »