Sparkfun

	Product	Description	Price	Add to Cart
	XBee Explorer Regulated	The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards and w...	$11.44	Notify when back in stock.
	XBee Explorer USB	This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. You get the red board only...	$27.95	Ships in 7 Days
	XBee 1mW Wire Antenna	This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to poin...	$26.39	Ships in 7 Days
	XBee Explorer Dongle	This is the Xbee Explorer Dongle unit for the XBee line. With the Xbee Explorer dongle you can now plug the unit directly into your USB port. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. You get the red board only. XBee modules sold below. Add a couple XBees, and a Re...	$28.69	Ships in 7 Days
	XBee 1mW Chip Antenna	This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to poin...	$32.50	Notify when back in stock.
	Interface Cable SMA to U.FL	This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connections. Documents: Datasheet	$5.69	Ships in 7 Days
	XBee 2mW Wire Antenna - Series 2 (ZB)	XBee 2mW Wire Antenna - Series 2 (ZB) sku: WRL-10414  This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between mi...	$32.00	Ships in 7 Days
	XBee Wireless Kit Retail	This is the same product as the XBee Shield with a multitude of extra parts including 2 XBee modules, the popular XBee Explorer, and headers for the shield. All these parts comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging findin...	$100.00	Notify when back in stock.
	Building Wireless Sensor Networks	Create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time you're halfway through this fast-paced, hands-on guide, you'll have built a series of useful projects, including a complete ZigBee wireless network that delivers remotely sensed data. This resource- an...	$35.64	Ships in 7 Days
	RF Link Receiver - 4800bps (434MHz)	RF Link Receiver - 4800bps (434MHz) sku: WRL-10532  These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only transmitters, they will only work communicating data one-way, you would need two p...	$5.70	Ships in 7 Days
	RF Link Transmitter - (434MHz)	RF Link Transmitter - 434MHz sku: WRL-10534  These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only transmitters, they will only work communicating data one-way, you would need two pairs (o...	$4.50	Ships in 24 hours
	RN-XV WiFly Module	RN-XV WiFly Module sku: WRL-10822   The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for ...	$40.00	Ships in 7 Days
	Bluetooth Modem - BlueSMiRF Silver	The BlueSMiRF Silver is the latest Bluetooth wireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF Gold. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be...	$39.95	Ships in 7 Days
	Interface Cable RP-SMA to U.FL	This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules. Dimensions: 4" Length	$5.36	Ships in 7 Days
	XBee Pro 50mW RPSMA - Series 2 (ZB)	XBee Pro 50mW RPSMA - Series 2 (ZB) sku: WRL-10419  This is the XBee XBP24-BZ7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between m...	$56.00	Ships in 7 Days
	RFM12B-S2 Wireless Transceiver	The RFM12B is a great inexpensive option for wireless communication; it's an ISM band FSK transceiver module implemented with a unique PLL. These modules operate in the 434MHZ band and fully comply with FCC and ETSI regulations. This module has a wide voltage supply range of 2.2-3.8VDC. An SPI interface is used to send data and ...	$7.91	Ships in 7 Days

1 2 3 … 7 Next »