Wearable Tech & E-textiles

The MyoWare® 2.0 LED Shield is designed to display the magnitude of a target muscle's signal and power the MyoWare 2.0 Muscle Sensor with its built...

The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin i...

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs ...

The Little Bird Macaw is an RGB LED strip 3 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). Thi...

This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ gr...

Integrated with the ESP32-D0WD, this 540*960 4.7" E-ink display comes with 16MB Flash and 8MB PSRAM, which can work well with other touch screens. ...

This flexible LED filament Chip comes with a diameter of 2mm and a length of 260mm. The small round hole end is the positive electrode, and the non...

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's bas...

Become the unicorn of your dreams! Learn about circuits in the coolest and blinkiest way - by building a light-up unicorn headband. Build the circ...

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect ...

Here is a jolly cute Bluetooth-enabled sensor-and-digital-clock to monitor your room's temperature and humidity. Only 110mm x 55mm, we dig its medi...

This board is designed to be a thin, bluetooth-enabled driver board for our Adafruit LED Glasses RGB LED matrix. That said, it's a perfectly good s...

Have you always wanted to upgrade your ensemble with a creepy-cool creature PCB silkscreen and an eye-blistering arrangement of LEDs? We love to pu...

If you want to put together a complete LED Glasses kit with our Adafruit LED Glasses front panel , and Bluetooth LED Glasses Driver, you should als...

Are you interested in making cosplay and Halloween projects with a Circuit Playground Express, but overwhelmed with what to buy? Better yet, do you...

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are...

Only 13mm long, Tomu really puts the micro in microprocessor. It's fully open-source development board with the silabs Gecko EFM32HG309 processo...

If you want to put together a complete LED Glasses kit with our Adafruit LED Glasses front panel, and Bluetooth LED Glasses Driver, you should also...

We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode...

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun! Use this part if you need to control something up an...

Our RedBoards are great. But don't they sometimes seem a little BIG?! Enter smôl, a new range of boards which are both small in size and small on ...

Our RedBoards are great. But don't they sometimes seem a little BIG?! Enter smôl, a new range of boards which are both small in size and small on ...

The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc.,...

This is a capacitive touch screen panel for use with the ESP32 4.7" E-ink screen. It has a built-in L58 touch chip, a white glass frame, and suppor...