Moog Werkstatt-Ø1 Mod Kit
This is the Mod Kit for the Moog Werkstatt-Ø1 synthesizer. Inside this kit you will find a plethora of bits and parts that can be used in conjunction with the Werkstatt-Ø1 to create your own projects, hacks, and custom interfaces. With each different part included with this add-on like, soft pots, trimpots, resistors, LEDs, diodes, caps, jumper cables and even a mini breadboard to hook everything up, you should find it easy to build anything you’d like to add to your Moog synthesizer.
In the Documents section below you will find many projects from Moog to use in conjunction with your Werkstatt-Ø1 Mod Kit. These projects include adding a photocell, volume knob, and pressure sensitive resistor or incorporating pitchblend, dual oscillator, and LFO Rate Quantizer interfaces. There are many more projects to experiment with, check them all out!
Includes:
- 1x Mini Modular Breadboard (White)
- 1x SoftPot Membrane Potentiometer (50mm)
- 1x Mini Photocell
- 2x Red LED - 5mm
- 2x Capacitor 1uF - 50V, 20%
- 2x Capacitor 2.2uF - 35V, 20%
- 2x Capacitor 4.7uF - 35V, 20%
- 3x Trimpot - 10K
- 4x Momentary Push Button Switch - 12mm
- 5x Resistor 1k - 1/4W
- 5x Resistor 3.3k - 1/4W
- 5x Resistor 6.8k - 1/4W
- 5x Resistor 10k - 1/4W
- 5x Resistor 150k - 1/4W
- 5x Resistor 680k - 1/4W
- 10x Premium Jumper Wires - F/F, 6"
- 10x Premium Jumper Wires - M/M, 6"
- 10x Premium Jumper Wires - M/M, 12"
Documents:
The Moog Werkstatt-Ø1 Mod Kit appears in the following collections: